Product Description
This is the standard Indicator (retains original indicators) version, finished in a durable satin black, it is truly an evolution in tail tidy design. The mono arm unit, being CNC machined and formed from a single piece of Aluminium makes this tail tidy unique and a leader in it’s class. If you want to stay ahead of the rest, be among the first to get one. This Tail Tidy accepts standard indicators, as shown.
Kit Contents
4x M6x 30mm (black) B/H screws
1x Stick on Reflector
4xM6 Washers (black)
2x Stickers
4x 6mm Flange Nuts
6x Cable Ties
2x Male Bullet Connectors
1x Spare bulb
2xM4x8mm c/sunk screws
1x Mono Arm Bracket
1x Back Plate - inc' LED light
Fitting Instructions
(Do not shorten the LED wires)
1. Remove the rear seat and tool kit
2. Remove the OE fender by undoing the four socket head screws (be careful not to lose the aluminium spacers between the fender and the seat unit) and unplug the electrics.
3. Remove the indicators from the OE fender and attach them to the Tail Tidy.
4. Assemble the Tail Tidy using the two 4mm c/sunk screws and route the wires using the zip ties. It will make things easier if you thread the bottom cable tie before putting both pieces together-don't tighten until assembly is complete.
5. Attach the Tail Tidy to the bike, using the four cap head screws from underneath. Thread the wires through and re-connect the wires. Connect the new number plate wires; Black-Black and Red-Red/Blue.
6. Refit the seat and tool kit.
7. Check all of the electrics work correctly.
8. Refit number plate, check all fastenings.
