Product Description
Dynojet Multi-Function Hub - £98.79
Requires Power Commander III USB to function
Power Commander V Includes Hub Functions. This unit is not required.
The Dynojet Multi-Function Hub allows you access to a range of advanced gadgets and features for your Dynojet Power Commander.
Several optional harnesses are available to permit both input and output to/from the module.
The Multi-Function Hub has connectors for up to 4 harnesses:
Map Selection Switch + Bracket - £27.39
Optional Accessory
If you choose to add this switch to your Multi-Function Hub you will be able to switch between two different maps on your Power Commander.
For example this could be used for switching between a "fuel economy map" for long touring rides, or a "full performance map" when you need the extra power.
For sports motorcycles it could be used for "Dry Nitrous Oxide" (read more at wikipedia) kits to allow you to make the fuel mixture richer when activating the oxide system.
If you have the Power Commander V Ignition module connected, it can switch to a less aggressive timing map at the same time!
Gear Position / Speed Input - £11.72
Optional Accessory
Adding this input to your Dynojet Multi-Function Hub will allow fuel adjustments to be made based on gear position. If you want to change the fuel ratio depending on which gear your motorcycle is in, then this is the input you need.
If you have the Power Commander V Ignition module connected you can also adjust the timing too!
Pressure Input - £11.83
Optional Accessory
Got Turbo? Using this input makes it possible for you to have the fuel automatically increase with boost level.
If you have an adjustable boost controller, adding this input will eliminate the need to remap your Power Commander each time the boost level is changed.
Pressure Input with General Motors 3 BAR pressure sensor connector also available @ £20.32
Relay Harness - £19.71
Optional Accessory
Using this harness allows you to trigger any relay depending on data your Power Commander receives. This can be any input attached to your Multi-Function Hub or an event in your Power Commander.
It can activate shift lights, Nitrous systems, air shifters and much more!
